U212-A Rolling Display

U212-A Rolling Display
Features:
Power : AC220V , 50Hz
Including : 2 displays , 1 power board , 1 transformer , 1 SSR
The content on the display could be changeable
Easily fixed on fuel dispenser
100% Factory Tested
HONGYANG GROUP Nauru Technical Center
wells at chinahongyang.com Fax: +86 (577)88097280

Features:
Power : AC220V , 50Hz
Including : 2 displays , 1 power board , 1 transformer , 1 SSR
The content on the display could be changeable
Easily fixed on fuel dispenser
100% Factory Tested
More Fuel Dispenser & Spare Parts, LPG Dispenser, CNG Dispenser, Satation Equipments and Full Solution for Fueling Station, Please Visit Our HONGYANG Group Main Website: www.chinahongyang.com
operate motor. If it still don’t move or slowly run, electric circuit or motor should be inspected. If not the rotor of pump maybe locked. Carefully check and cleanse oil strainer. If failure still exists after the above inspection, overflow valve should be checkup. In case that valve core jam, shut down incompletely or lose in valve seat the oil in high pressure area overflow into negative area, resulting in no delivery or inefficient discharge. Taking out valve core and spring so as to clean dirty, inspect valve seat at same time. If valve seat is loose re-fix it through oil-resistant glue or change a new pump. When find scrap of spring and graphite, washing overflow valve is must, changing broken parts if necessary. If found rotor is stuck there would be several reasons related, such as spring broken, long vane, vane segment, lose bolts at top cover, etc. reassembling after overcome these reasons. Some manufacturers adopt new spring material evading broken. The lose match of rotor and axis of pump also result in no delivery or inefficient discharge. This situation will be overcome by changing rotor. After the above check and examine still find any rotor stuck or overflow valve abnormal, it is suggestive that vane abrasion is extensive, broken and spring damaged. Much abrasive vane can not successfully segment high and low pressure area, resulting no delivery or inefficient discharge as the areas exchange. The broken vane or spring not only cause flow trouble but also in fuel dispenser crease fuel dispenser noise as whole. Furthermore, if they flow into other inner components may result in new failure. The solution to this is to change new vane or spring and clean out broken piece. fuel dispenser It is suggestive that change all vanes if fuel dispenser have operated long time. Changing a new pump overcomes too large abrasion between frame and rotor. To check whether a leakage occurred in pine between fuel dispenser and tank, different diameter of pipe connection, bottom valve stuck or leakage. Abnormal noise and vibration The reason of
(141 pages) 42 Modification mise en page (sans 200902 C.L. volution du contenu) 12.4.1: ajout note 13.3.1.30 14.1: D5029 exclusivement num rique 13.3.2.46: ajout note 2 (137 pages) All right reserved ? Imprim le 210203 13:02 13138 MPA V5.2: SPECIFICATIONS Ref : NT1118R5 TECHNIQUES Nb Pages : 138 + 0 PJ de la LIAISON AUTOMATE-MONETIQUE Date : POS Department Date Rev. Description Auteur V rificateur Approbateur Edit. 9.2.3: pr cisions (toutes cartes) 240902 43 C.L. 11.5.2: ajout D815 IDSA et D816 IDPA (B0) 11.6.2: ajout D815 IDSA et D816 IDPA (EMV) 11.5.9: ajout D815 IDSA et D816 IDPA (B0) 11.6.9: a fuel dispenser jout D8 fuel dispenser 15 IDSA et D816 IDPA (EMV) 11.7.9: ajout D5043 Taux TVA (ISO2) 13.3.1.28: D5027 pr cis fuel dispenser ions (toutes cartes) 13.3.1.38: D5039: ajout codes 108 et 109 (toutes cartes) 13.3.1.39: D5040: ajout code 185 (EMV)
a recipe for rising tension. They say there is no alternative but to negotiate solutions to cultural clashes, new or old. Rudyard Griffiths of the Dominion Institute, a think- tank concerned with Canadian identity, points to a long history of finding ways to accommodate seemingly intractable differences of language, culture and religion, such as those between English and French speakers or Catholics and Protestants. Some of the new disputes will doubtless be resolved in the courts. Politicians, who until a few years ago were happy to talk up multiculturalism, have mainly fallen silent. There have been a few exceptions. Dalton McGuinty, the premier of Ontario, said of the niqab debate that women were free to do as they pleased. Stephen Harper, the Conservative prime minister, invited the Aga Khan to dinner. His government is helping to set up the new pluralism centre. Officially, then, Canada still stands squarely behind multiculturalism. But the silences are eloquent. © 2006 . About sponsorship Colombia Thugs and politics Nov 16th 2006 | SAN ONOFRE From The Economist print edition Investigating a reign of terror THE paint still looks fresh on the signs urging voters of the small town of San Onofre to re-elect Álvaro García to Colombia s Senate and Erik Morris to its Chamber of Representatives. At an election last March the voters of the northern department of Sucre did a fuel dispenser s they fuel dispenser were urged. But now both men and another senator from Sucre have been charged by the country s Supreme Court with financing right-wing paramilitary groups who used terror to co fuel dispenser w the population. Five other local politicians face investigation. Mr García, who has yet to surrender to police, faces additional charges of helping to plan the killing of 12 people in nearby Macayepo in 2000, and of murdering an election official. All three are members of political parties that support Colombia s president, Álvaro Uribe. Th