P-GQ FUEL DISPENSER

P-GQ FUEL DISPENSER

FlowMeter Type :Optional

Accuracy :±0.2%

Pressure Loss (kg/cm):Under 0.25

Motor Voltage(V): 110V/220V/380V,50Hz/60Hz

Capacity(hp) :1HP(0.75kw)

Input Voltage : 110V/220V/380V,50Hz/60Hz

Nozzle : Auto Shut-off Nozzle

Environmental Condition : -40~~+55degree

Control Type : Solenold Vale Control Type

Preset : Function Provided(Small LCDIndicator)

Display(Counter):Type LCD and Bright Backlight

Digit of Volume :0~~999,999(6 Digits),Decimal point can be changed

Digit of Amount :0~~999,999(6 Digits),Decimal point can be changed

Digit of Unit price : 0~~9999(4 Digits),Decimal point can be changed

Digit of Total Range :0~~99,999,999,99

Optional Display :Type LCD and Bright Backlight

Digit of Volume : 0~~99,999,999(8 Digits),Decimal point can be changed

Digit of Amount : 0~~99,999,999(8 Digits),Decimal point can be changed

Digit of Unit price : 0~~999999(6 Digits),Decimal point can be changed

Digit of Total Range: 0~~99,999,999,99

Totalizer: 1~~9,999,999

Hose :4.5m

Weight :205kg

Dimension(L×W×H) : 1060*550*1620(mm)

Dimension(L×W×H)Of Qty of Container : 40ft: 44 20ft: 22

result during approval progress. The other is to make adjustment as temperature fluctuate 20 degree. Stopwatch, minimum value 0.1 second, is used for measuring how long a certain volume medium disc fuel dispenser harge out of fuel dispenser so as to calculate its flow rate. Gradienter, precision being 0.05mm/m, measures the degree of level. Article III Indicating appraisal method and data processing Appraisal of fuel dispenser actually is an indicating access. Presently, cubage compare method is mostly used defining basic tolerance between the volumes flow over flow meter and in metal standard measurer. Diagram 6-2 is illustrated the fuel dispenser’s appraisal flow. 1: Check valve 2: Pump 3: Vapor separator 4: Flow meter 5: Indicating device 6: Hose 7: Nozzle 8: Standard measurer 9: Measurer 10: Switch & zeroing 11: Container 12: Motor 13: Tank 14: Filter net Diagram 6-2: Appraisal of fuel dispenser using metal standard measurer Preparation before appraisal Place metal standard measurer on the hard ground and adjust with gradienter. It also put on vehicle or other bracket, as long as not waving or vibration during appraisal progress. Metal standard measurer should be earthing- connected. It is suggested to connect the measurer to ground terminal of fuel dispenser, making them being same potential. Running-in and wet measurer. Putting indicator device at zero, open nozzle and observe oil indicator. Oil is transparen fuel dispenser t as there is no foam in it. If have foam or bubble oil would be feculent and opaque. If foam exists in oil for a long time, fuel dispenser would have trouble. Appraise again after solving failure. Close nozzle as measurer full of oil. Empty measurer in accordance with relative method and time, and shut off bottom valve, putting measurer in preparation state. Appraisal procedure of indicating valve Set unit price; Adjust flow to the maximum Qmax; Wet measurer and place it according to regulation; Tune indicator finger to zero position; Infuse measurer as preset volume, measure outlet t fuel dispenser

ote that dispensers that do not permit the　　 Country_Code to be changed remotely should:　　 Reject any write attempts with a Data_ACK　　 value of 2 fuel dispenser (Read OnlyNot Writable).　　 Must set the Country_Code to the hardcoded　　 country code value.　　 When a master resetcold start occurs on the dispenser　　 device the dispenser should reset this Data_Id to its　　 default value.　　FP31_2.22 IFSF - STANDARD FORECOURT PROTOCOL October 2005　　 DISPENSER APPLICATION　　Page: 62　　 CALCULATOR DATABASE　　 DB_Ad = C_DAT (01H)　　 Data Field Type ReadWrite MO　　 Data Element Name　　 Description　　 _Id (Values) in State　　 7 Bcd2 R(1-9) M　　 Blend_Tolerance　　 (07H) (0-99) W(1-2)　　 Specifies the blending error tolerance the percentage (0-　　 99% fuel dispenser ) indicates the calculation accuracy.　　 0 = no control is done　　 Please note that dispensers that do not permit the　　 Blend_Tolerance to be changed remotely should:　　 Reject any write attempts with a Data_ACK　　 value of 2 (Read OnlyNot Writable).　　 Must set the Blend_Tolerance to the hardcoded　　 country code value.　　 When a master resetcold start occurs on the dispenser　　 fuel dispenser

ld is part of a cluster that has been pumping out oil for more than 100 years. It has already produced 2 billion barrels of oil, but has perhaps as much again left. The trouble is that it conta fuel dispenser ins extremely heavy oil, which is very difficult and costly to extract. After other companies despaired of the field, Chevron brought Kern back from the brink. Applying a sophisticated steam-injection process, the firm has increased its output beyond the anticipated peak. Using a great deal of automation (each engineer looks after 1,000 small wells drilled into the reservoir), the firm has transformed a process of “flying blind�into one where wells “practically monitor themselves and call when they need help� The good news is that this is not unique. China also has deposits of heavy oil that would benefit from such an advanced approach. America, Canada and Venezuela have deposits of heavy hydrocarbons that surpass even the Saudi oil reserves in size. The Saudis have invited Chevron to apply its steam-injection techniques to recover heavy oil in the neutral zone that the country shares with Kuwait. Mr Naimi, the oil minister, recently estimated that this new technology would lift the share of the reserve that could be recovered as useful oil from a pitiful 6% to above 40%. All this explains why, in the words of Exxon Mobil, the oil production peak is unlikely “for decades to come� Governments may decide to s fuel dispenser hift away from petroleum because of its nasty geopolitics or its contribution to global warming. But it is wrong to imagine the world s addiction to oil will end soon, as a result of genuine scarcity. As Western oil companies seek to cope with being locked out of the Middle East, the new era of manufactured fuel will further delay the onset of peak production. The irony would be if manufactured fuel also did something far more dramatic—if it served as a bridge to whatever comes beyond the nexus of petrol and the internal combustion engine that for a century has held the world in fuel dispenser