P-G22Q FUEL DISPENSER

P-G22Q FUEL DISPENSER

FlowMeter Type : Optional

Accuracy : ±0.2%

Pressure Loss (kg/cm): Under 0.25

Motor Voltage(V): 110V/220V/380V,50Hz/60Hz

Capacity(hp) :1HP(0.75kw)

Input Voltage : 110V/220V/380V,50Hz/60Hz

Nozzle : Auto Shut-off Nozzle

Environmental Condition : -40~~+55degree

Control Type :Solenold Vale Control Type

Preset : Function Provided(Small LCDIndicator)

Display(Counter): Type LCD and Bright Backlight

Digit of Volume : 0~~999,999(6 Digits),Decimal point can be changed

Digit of Amount :0~~999,999(6 Digits),Decimal point can be changed

Digit of Unit price : 0~~9999(4 Digits),Decimal point can be changed

Digit of Total Range :0~~99,999,999,99

Optional Display :Type LCD and Bright Backlight

Digit of Volume :0~~99,999,999(8 Digits),Decimal point can be changed

Digit of Amount :0~~99,999,999(8 Digits),Decimal point can be changed

Digit of Unit price : 0~~999999(6 Digits),Decimal point can be changed

Digit of Total Range :0~~99,999,999,99

Totalizer :1~~9,999,999

Hose: 4.5m

Weight : 235kg

Dimension(L×W×H) :1060*550*1620(mm)

Dimension(L×W×H)Of Qty of Container :40ft: 44 20ft: 22

oil, so as to reduce the volume of drained oil. Turn adjust fuel dispenser ing bolt clockwise to reduce discharge, anticlockwise to increase discharge. Therefore, changing the position of bolt enable discharge approach academic volume and reach the requirements on measurement transducer of national appraisal regulations. As two regulative bolts access to adjusting piston, the adjusting discharge in a circulation per bolt can be calculated in the following formula: △V = 1/2πd12 nt fuel dispenser (2--4 ) △V ── adjusting value in per circulation; D1 ── diameter of regulative piston; n ── turning number of adjusting bolt; t ── screw- pitch of adjusting bolt. There is another metal piston measurement transducer in current market. See the Diagram 2-19. Regulative piston is singularly installed in piston rather than connect with rod in this model. Its adjusting value in terms of per adjusting bolt is: △V = 1/4πd2 nt (2--5 ) Common failure and Troubleshooting Metal piston measurement transducer has the two common failures --- accuracy decline and mechanical trouble. Measure accuracy beyond scope The allowed measurement accuracy of fuel dispenser is ±0.3 %, repeated tolerance no more than 0.15 % according to the stipulation of JJG443-98 Fuel dispenser. The maximum allowed tolerance of min. measured valve don’t exceed ±0.5 %，its repeated tolerance no more than 0.25 %. The ratio of maximum flow (Q max.) to minimum flow (Q min.) is 10 to 1. as fuel dispenser leave factory. The ratio should not be less than 5: 1 in inspecting at operation locale. All of exceeded tolerance is regarded as beyond measurement accuracy. There are many elements and reasons resulting in measurement accuracy beyond scope, including unstable hydraulic system (extensive pressure fluctuation), electric system failure, thick colloid in frictional interface, measurement transducer abra fuel dispenser sion, etc. The last two reasons will mainly be introduced in this article. Regulating adjusting

- the token (xxxxx) is fuel dispenser the same as the token　　 generated by the originator of the READ-message　　June 2005 IFSF - STANDARD FORECOURT PROTOCOL FP2_1.89　　 COMMUNICATION SPECIFICATION　　 fuel dispenser Page: 17　　 bin16 Message Length　　 M_Lg　　 - the number of bytes in the ANSWER-message　　 following　　 bin8 1 to 8 Database Address Length　　 DB_Ad_Lg　　 - the number of address bytes which are used to　　 specify from where the data has come　　 x bin8 Database Address　　 DB_Ad　　 (x = 1 to 8) - the database address from where the data has　　 come　　 bin8 1 to 255 Data Identifier　　 Data_Id　　 - the identifier for the first requested application　　 data element　　 bin8 0 to 254 Data Length　　 Data_Lg　　 or or - number of bytes for the first application data　　 bin8 bin16 255 element contents　　 fuel dispenser

e increase in the global labour force has also curbed worke fuel dispenser rs bargaining power, and hence wage costs. More generally, the expansion in global supply brought about by the emerging economies has reduced price pressures at any given rate of growth and so reduced the cost of fighting inflation. And by helping to tame inflation, globalisation may also have bolstered the credibility of central banks, thus reducing inflationary expectations. Last but not least, globalisatio fuel dispenser n has reduced the sensitivity of inflation to changes in the amount of domestic economic slack. A study by Claudio Borio and Andrew Filardo, two economists at the Bank for International Settlements, confirms that inflation rates in developed economies have become less sensitive to the domestic output gap (the difference between actual and potential GDP), whereas global economic conditions have become more important. In a closed economy, when production outpaces potential output, inflation rises. In an open economy, an increase in demand can be met by imports, so it has less of an effect on inflation. This makes a nonsense of traditional closed-economy models used to forecast inflation, which assume that firms set prices by adding a mark-up over unit costs, with the size of the margin depending on the amount of slack in the domestic economy. It also explains why inflation is still relatively low even though domestic capacity utilisation has been rising rapidly and unemployment has been falling in most developed economies at a global level there is still ample economic slack. Inflated claims? Some economists question the link between globalisation and lower inflation. For example, a study in the IMF s April 2006 World Economic Outlook concludes that the decline in real import prices caused by globalisation has had little lasting effect on inflation rates. But this ignores the potentially larger i fuel dispenser ndirect effects of increased international competition. Cheaper goods from China do not just reduce the prices of imp