K-GAQ FUEL DISPENSER

K-GAQ FUEL DISPENSER

FlowMeter :Type :Optional

Accuracy :±0.2%

Pressure Loss (kg/cm):Under 0.25

Motor Voltage(V):110V/220V/380V,50Hz/60Hz

Capacity(hp):1HP(0.75kw)

Input Voltage :110V/220V/380V,50Hz/60Hz

Nozzle :Auto Shut-off Nozzle

Environmental Condition : -40~~+55degree

Control Type :Solenold Vale Control Type

Preset :Function Provided(Small LCDIndicator)

Display(Counter):Type:LCD and Bright Backlight

Digit of Volume :0~~999,999(6 Digits),Decimal point can be changed

Digit of Amount :0~~999,999(6 Digits),Decimal point can be changed

Digit of Unit price :0~~9999(4 Digits),Decimal point can be changed

Digit of Total Range :0~~99,999,999,99

Optional Display:Type:LCD and Bright Backlight

Digit of Volume :0~~99,999,999(8 Digits),Decimal point can be changed

Digit of Amount :0~~99,999,999(8 Digits),Decimal point can be changed

Digit of Unit price :0~~999999(6 Digits),Decimal point can be changed

Digit of Total Range :0~~99,999,999,99

Totalizer:1~~9,999,999

Hose:4.5m

Weight :280kg

Dimension(L×W×H) :1180*650*2020(mm)

Dimension(L×W×H)Of Qty of Container :40ft: 29

ping a little oil flow out of corrugated pipe, put a container under it. The method is suggested to be applicable to other maintenance of hydraulic components. Article VI Solenoid valve In this Article a switch, controlled by electric components, is installed at inlet or outlet of measurement transducer, which is used for ensure the accuracy of presetting filling volume of fuel dispenser. Nozzle cannot be closed after finishing presetting volume due to the inertia of pump and pressured oil, which results in that real volume exceed presetting volume so as to affect fuel dispenser’s accuracy. In order to prevent this phenomenon occurring, most of manufacturers of fuel dispenser adopt to mount a solenoid valve at inlet or outlet of measurement transducer, switching off valve prior to presetting volume getting reach through regulating appropriate ahead volume. The method is one of the most efficient measures that used for ensuring fuel dispenser’s accuracy and preventing overrun resulted from the inertia of pump and pressure oil. There are two kinds of solenoid vale --- membrane type and piston type. The former, simple structure and high anti—pollution, is closed through membrane. However, its performance is depended upon the technology about membrane and weather. The latter valve controlled through piston has wide applicable range of temperature, weak to anti-jammed pollution. Double flux solenoid valve is controlled by the position move fuel dispenser ment of cam that is driven by motor, and large or small flux is realized through the open or closed of main or vice valve. It has merits of wide applicable fuel dispenser temperature range, high pollution-resistant. At present, most manufacturers adopt double flux membrane solenoid valve in fuel dispenser. Double flux solenoid v fuel dispenser alve Structure and working principle Membrane solenoid valve is widely adopted recently, which also called double flux solenoid valve, shown in Diagram 2-35 and 2-36. Diagram 2-35: Working principle of double flux solenoid valve Diagram 2-36:

Page: 9　　- Write Message　　- Unsolicited Data Message with Acknowledge　　- Unsolicited Data Message without Acknowledge　　- Acknowledge Message　　A Read Message allows an originator device to read the value(s) of any system data　　element from a recipient device within a specified database. It is possible to read multiple　　data elements in the one command. This is achieved by requesting a list of data elements. So　　only the accessible data elements must be requested and the messages are application　　dependent. The recipient must respond to the Read Message with an Answer Message　　within the time-out period of 8 seconds. However if a recipient node is unable to respond it　　must reply with an ACK. If for instance the device was busy it would reply with a　　MSG_ACK of NAK7.　　An Answer Message is a message which provides to the originator of a Read Message　　all the requested data elements.　　A Write Message is used to send data from an originator to a recipient device. The　　identifier of the data element is defined in the recipient device. It is possible to write a　　multiple data elements in the one command. This is achieved by issuing a message including　　a list of data elements and their values.　　Sending a Command is considered as writing a data element with no value. The same　　message is able to send commands and data elements used as parameters.　　The recipient must respond to the Writ fuel dispenser e Message with an Acknowledge Message within　　the time-out period of 8 seconds.　　An Unsolicited Data Message with Acknowledge is used for sending data fuel dispenser elements. The　　recipient must respond to this message with an Acknowledge Message within the defined　　time-out of 8 seconds.　　The only difference from a Write fuel dispenser Message is that the data elements (database address data　　identifier data element contents) are defined in the originator device.　　An Unsolicited Data Message without Acknowledge is used for sendi

they are a fifth of Israel s population of 6.4m, a lot of Arabs live in the north, which is why, of the 39 Israeli civilians killed by Hizbullah rockets up to August 8th, 15 were Arabs—Palestinians, Druze or Bedouin. That has not changed their feelings. A survey early this month by Tel Aviv University s Tami Steinmetz Centre found that Arab-Israelis feel practically the opposite about the war to their Jewish compatriots. Among Jews, 93% think Israel s campaign justified, 91% back air strikes despite the destruction and death they wreak on Lebanon, and only 16.5% want an immediate ceasefire. The figures for Arabs, conversely, are 17%, 6% and 71%. Most Arabs in Israel, says Sammy Smooha, a sociologist at Haifa University, view the Arab-Israeli conflict as the rest of the region does, with a focus on the injustice done to the Palestinians. “That doesn t mean they support Hizbullah,�he says, “but they see this as an unjust war in which, although Hizbullah provoked Israel by kidnapping soldiers, there was no need to start a war, certainly not to destroy half of Lebanon.� The sense of injustice has other sources too. A lot of Arabs in northern Israel have relatives or friends in Lebanon, especially in its Palestinian refugee camps, which have been hit by several Israeli bombs. Moreover, since the intifada that erupted in 2000, Palestinian Israelis in particular have been treated with more suspicion, while being gradually cut off fuel dispenser from their brethren in the occupied territories by Israel s clampdown there. In Israel, Arab politicians have drawn furious criticism from Jews by deno fuel dispenser uncing Israel s air attacks as war crimes and blaming the Israeli government, rather than Hizbullah, for the deaths of both Lebanese and Israeli civilians. At an fuel dispenser anti-war rally in Tel Aviv on August 5th, perhaps a third of the 2,000-3,000 participants were Arab, while most of the Jewish marchers were members of fringe anti-Zionist groups such as the communists and anarchists. Noticeably, even in their unit