HONGYANG GROUP Nauru Technical Center

Fax: +86 (577)88097280

HONGYANG Group logo

HONGYANG GROUP Nauru Technical Center , Discuss Technical Problem , Suply After Service Online of Fuel Dispenser, Please Regist Firstly

K-GA44Q FUEL DISPENSER

fuel-dispenser

K-GA44Q FUEL DISPENSER

FlowMeter Type :Optional

Accuracy ±0.2%

Pressure Loss (kg/cm): Under 0.25

Motor Voltage(V): 110V/220V/380V,50Hz/60Hz

Capacity(hp) :1HP(0.75kw)

Input Voltage :110V/220V/380V,50Hz/60Hz

Nozzle : Auto Shut-off Nozzle

Environmental Condition : -40~~+55degree

Control Type : Solenold Vale Control Type

Preset : Function Provided(Small LCDIndicator)

Display(Counter) :Type LCD and Bright Backlight

Digit of Volume : 0~~999,999(6 Digits),Decimal point can be changed

Digit of Amount : 0~~999,999(6 Digits),Decimal point can be changed

Digit of Unit price : 0~~9999(4 Digits),Decimal point can be changed

Digit of Total Range : 0~~99,999,999,99

Optional Display: Type LCD and Bright Backlight

Digit of Volume : 0~~99,999,999(8 Digits),Decimal point can be changed

Digit of Amount :0~~99,999,999(8 Digits),Decimal point can be changed

Digit of Unit price :0~~999999(6 Digits),Decimal point can be changed

Digit of Total Range : 0~~99,999,999,99

Totalizer: 1~~9,999,999

Hose :4.5m

Weight :280kg

Dimension(L×W×H) : 1540*690*2210(mm)

Dimension(L×W×H)Of Qty of Container :40ft: 29

products links

links

technical archives

    mp will decrease and overflow valve cut down flowage passed. When need to decrease flow rate, one will reduce openness of nozzle so as to increase the outlet pressure of pump. In that case, openness of valve and returned oil increase due to overflow valve work on spring, the outlet flowage of fuel dispenser is lessened. When the pressure of hydraulic system in fuel dispenser is suddenly increased due to some cause, overflow valve overcome spring strength under high pressure, raise openness and returned oil flowage to reduce pump pressure and protect the hydraulic system. Clockwise turn adjusting bolt of overflow valve given the openness of nozzle is unchanged the flux of fuel dispenser will be increased; anticlockwise turn decrease flux. Performance of vane pump Suction capacity Like other pump the good performance of vane pump should has high suction capacity, excellent stability with less vibration, small transitional volume, low noise, nice reliability and maintainable. These traits depend upon rational structure design, right selection of material and manufacturing level. User’s correct usage and maintenance is very important as well. Vane pump suction capacity mainly lies in the two aspects: suction distance and avoidance of air pocket. Diagram 2-5 is about pump, explaining pump suction distance. Suction distance refers to fuel dispenser’s capacity to suck oil from a certain vertical and horizontal distance, often meaning vertical distance. Keeping suction distance a definite vacuum pressure in pump inlet is prerequisite. When the oil level is high or low in tank pump inlet vacuum pressure is often high. Under such high pressure, overflow valve overcome spring strength increase openness and returned oil. Due to the pressure r fuel dispenser eturned oil in other penetrative section is also increased, the filling flux is cut down consequently. The outlet flux of fuel dispenser becomes zero when returned oil reaches a certain volume. Therefore, when the returned oil of overflow valve and other penetrative s fuel dispenser fuel dispenser

technical specification

    ATION SPECIFICATION   Page: 43   MS_Ack=8 Message unexpected occurs when for whatever reason the CD sends   an ANSWER or ACKNOWLEDGE message that is not expected i.e. there is no   corresponding READ or WRITE message (i.e. one with the same token in the   Message Status (M_st) field.   Example Ms_Ack=8: An error occurs in the CD processing and instead of trying to   Read the Heartbeat Interval of a device it sends an Answer message. In this example a   token of value 10 (0AH) is used.   1801 0208 02 2A 0003 0100 04   and the reply would be   0208 1801 00 EA 0003 0100 08  5.3.2 Application Data Layer Errors   At this point the sending application both read and write has been able to transmit   and the recipient device receive the entire application message. The device is not busy   and no blocks are missing. Error handling must look at the content of the application   data. Data errors are reported in the following sequence.   1. Check the Database Address is valid. An Acknowledge message containing a   MS_Ack of 6 is always returned for an unknown database address for both   read and write messages.   2. Check the Data_ID is valid. For a read message the response is an answer   message in which the Data_Lg will be set to zero and no data is present. E.g. a   Read of Data_ID=0 in the communication services database will have the   following transmit and send fuel dispenser message (note the token has been given a value of   1E).   1801 0208 02 1E 0003 0100 00   0208 1801 00 3E 0004 0100 00 00   The same reply is give fuel dispenser fuel dispenser

we are committed to create the best workplace, encourage our staffs to put their own personalities into their jobs, and provide them a stage to show themselves.

    a debate on the budget law. “Don t be afraid, because if this government does horrible things as you fear it will, the people won t vote for it, just like they didn t vote for you.�Senator Kirchner neglected to mention that her husband s power grab makes such a catastrophe more likely. © 2006 . About sponsorship Cuba An uneasy calm Aug 10th 2006 | HAVANA AND MIAMI From The Economist print edition Information about Cuba s ailing leader is scarce, but speculation is not “IT S like being in the middle of a hurricane,�said one Havana resident, groping for a way to describe the mood in Cuba s capital after Fidel Castro surrendered power temporarily for the first time in 47 years. “Everything seems totally quiet, but you know it can t last.� There are more security patrols and the summer carnival has been AP cancelled but those are among the few signs that anything is amiss. Official bulletins insist that the 80-year-old leader is recovering after emergency gastric surgery but that it will take weeks, if not months, before he is ready to return to work. Meanwhile, his brother, Raúl, the defence minister, is in charge. Most people in the western hemisphere s only communist country believe what they are told. Yet the authorities have presented no evidence that Fidel is on the mend, or even that he is still alive. And Raúl has yet to appear in public. In their absence, rumour and speculation flourish. One line of speculation is that top Communist Party officials will use Fidel s sick leave to encourage a transition they have long thought necessary. Brian Latell, a former analyst from the fuel dispenser United States Central Intelligence Agency, suggests that Fidel will remain party chief, and thus the symbol of Cuba s revolution, but will pass on the presidency, which exercises day-to-day power, perhaps to Carlos Lage, the third most senior official, fuel dispenser fuel dispenser