D-G2 FUEL DISPENSER

D-G2 FUEL DISPENSER

Pump Type: Optional

Inlet Pressure : >=54kPa.

Flow rate (L/min.): 55±5

Suction Distance (m): 6(verticalmente) / 50(orizzontalmente)

FlowMeter Type : Optional

Accuracy : ±0.2%

Motor Voltage(V): 110V/220V/380V,50Hz/60Hz

Capacity(hp): 1HP(0.75kw)

Input Voltage : 110V/220V/380V,50Hz/60Hz

Nozzle: Auto Shut-off Nozzle

Environmental Condition: -40~~+55degree

Control Type: Solenold Vale Control Type

Preset: Function Provided(Small LCDIndicator)

Display(Counter): Type LCD and Bright Backlight

Digit of Volume: 0~~999,999(6 Digits),Decimal point can be changed

Digit of Amount : 0~~999,999(6 Digits),Decimal point can be changed

Digit of Unit price : 0~~9999(4 Digits),Decimal point can be changed

Digit of Total Range : 0~~99,999,999,99

Optional Display Type: LCD and Bright Backlight

Digit of Volume : 0~~99,999,999(8 Digits),Decimal point can be changed

Digit of Amount : 0~~99,999,999(8 Digits),Decimal point can be changed

Digit of Unit price: 0~~999999(6 Digits),Decimal point can be changed

Digit of Total Range: 0~~99,999,999,99

Totalizer: 1~~9,999,999

Hose :4.5m

Weight : 215kg

Dimension(L×W×H): 900*620*2180(mm)

Dimension(L×W×H)Of Qty of Container : 40ft: 45 20ft: 22

ping a little oil flow out of corrugated pipe, put a container under it. The method is suggested to be applicable to other maintenance of hydraulic components. Article VI Solenoid valve In this Article a switch, controlled by electric components, is installed at inlet or outlet of measurement transducer, which is used for ensure the accuracy of presetting filling v fuel dispenser olume of fuel dispenser. Nozzle cannot be closed after finishing presetting volume due to the inertia of pump and pressured oil, which results in that real volume exceed presetting volume so as to affect fuel dispenser’s accuracy. In order to prevent this phenomenon occurring, most of manufacturers of fuel dispenser adopt to mount a solenoid valve at inlet or outlet of measurement transducer, switching off valve prior to presetting volume getting reach through regulating appropriate ahead volume. The method is one of the most efficient measures that used for ensuring fuel dispenser’s accuracy and preventing overrun resulted from the inertia of pump and pressure oil. There are two kinds of solenoid vale --- membrane type and piston type. The former, simple structure and high anti—pollution, is closed through membrane. However, its performance is depended upon the technology about membrane and weather. The latter valve controlled through piston has wide applicable range of temperature, weak to anti-jammed pollution. Double flux solenoid valve is controlled by the position movement of cam that is driven by motor, and large or small flux is realized through the open or closed of main or vice valve. It has merits of wi fuel dispenser de applicable temperature range, high pollution-resistant. At present, most manufacturers adopt double flux membrane solenoid valve in fuel dispenser. Double flux solenoid valve Structure and working principle Membrane solenoid valve is widely adopted recently, which also called double flux solenoid valve, shown in Diagram 2-35 and 2-36. Diagram 2-35: Working principle of double flux solenoid valve Diagram 2-36: fuel dispenser

g　　NOTE Objective evidence may be obtained through observation measurement test (3.8.3) or other means.　　3.8.2　　inspection　　conformity evaluation by observation and judgement accompanied as appropriate by measurement testing or　　gauging　　 ISOIEC Guide 2　　3.8.3　　test　　determination of one or more characteristics (3.5.1) according to a procedure (3.4. fuel dispenser 5)　　3.8.4　　verification　　confirmation through the provision of objective evidence (3.8.1) that specified requirements (3.1.2) have　　been fulfilled　　 15　　? ISO 2005 All rights reserved　　ISO 9000:2005(E)　　NOTE 1 The term verified is used to designate the corresponding status.　　NOTE 2 Confirmation can comprise activities such as　　 performing alternative calculations　　 comparing a new design specification (3.7.3) with a similar proven design specification　　 undertaking tests (3.8.3) and demonstrations and　　 reviewing documents prior to issue.　　3.8.5　　validation　　confirmation through the provision of objective evidence (3.8.1) that the requirements (3.1.2) for a specific　　intended use or application have been fulfilled　　NOTE 1 The term validated is used to designate the corresponding status.　　NOTE 2 The use conditions for validation can be real or simulated.　　3.8.6　　qualification process　　process (3.4.1) to demonstrate the ability to fulfil specified requirements (3.1.2)　　NOTE 1 The term qualified is used to designate the fuel dispenser corresponding status.　　NOTE 2 Qualification can concern persons products (3.4.2) processes or systems (3.2.1).　　EXAMPLE Auditor qualification process material qualification process.　　3.8.7　　review　　activity undertaken to determine the suitability adequacy and effectiveness (3.2.14) of the subject matter to　　achieve established objectives　〠fuel dispenser

€”although the police and legitimate lenders are trying to stifle the unsavoury end of the trade. Investors, though, are already feeling the pain. The prices of shares in the biggest consumer-finance companies are between 6% and 27% lower than they were before the Supreme Court s ruling. Proudly Produced by nEo  © 200 fuel dispenser 6 . Proudly Produced by nEo  About sponsorship European insurance Waking up the lion of Trieste Mar 2nd 2006 | MOGLIANO VENETO From The Economist print edition Generali s bosses are shaking up the Italian insurer s complacent culture AFP “WE USED to be a sum of companies,â€?says Sergio Balbinot, one of Generali s two chief executives. Now, he implies, Italy s biggest insurer, symbolised since 1848 by the winged lion of St Mark, is a unified whole. Under Generali s first strategic three-year plan, announced in January 2003, Mr Balbinot and Giovanni Perissinotto, his co- boss, have made the insurer from Trieste a more coherent group, with better co-ordination among its national subsidiaries. On March 6th the men at the top will announce to investors a second set of performance and profit targets, covering the next three years. They still have some way to go. Generali s performance lags behind that of its European peers. Its market capitalisa fuel dispenser tion of ¬38 billion ($45 billion) is much lower than those of France s AXA and Germany s Allianz, both around ¬55 billion. Despite Mr Balbinot s and Mr Perissinotto s efforts, since 2003 Generali s share price has not matched the Dow Jones index of insurers shares. Its return on embedded value, an insurance-industry measure that includes future profits from policies already on the books, is about fuel dispenser